T 3361 013

3 2 68 45 20 E Contact arrangement Contact arrangement Rated voltage2) Rated voltage Rated impulse withstand voltage2) Pollution degree2) Installation category Insulation group C Current rating Insulation resistance Contact resistance Climatic category Temperatur range IP degree Insertion and withdrawal force mechanical operation housing material dielectric material contacts termination technique wire gauge flamability locking system B Standard IEC 61076-2-106 1) IEC 60130-9 IEC 60664-1 IEC 60664-1 60664-1 IEC 60664-1 IEC 60664-1 IEC 60512-5-2 UL 1977 IEC 60512-3-1 IEC 60512-2-1 IEC 60668-1 IEC 60668-1 ÎEC 60529 1200 V (800 V) IEC IEC 60512-13-2 60512-9-1 14 Ag T 3671 013 U (14-b) Au T 3671 038 U 14 Ag T 3651 013 U (14-a) Au T 3651 038 U 12 Ag T 3636 013 U (12-a) Au T 3636 038 U 8 Ag T 3505 013 U (08-a) Au T 3505 038 U 7 (07-b) Ag T 3485 013 U Au T 3485 038 U 7 Ag T 3476 013 U (07-a) Au T 3476 038 U 14-b 19-a (6-a) Au T 3401 038 U 5 Ag T 3361 130 U (05-b) Au T 3357 038 U 5 Ag T 3361 013 U (05-a) Au T 3361 038 U 4 (04-a) Ag T 3301 013 U Au T 3301 038 U 10 Ohm -40°C...+100°C / -40°F...+212°F IP 40 25N 30N 35N 35N 50N 55N 55N 60N 50N 50N 50N 60N Silver >500 mating cycles / Gold >1000 mating cycles UL 94 VO metal screw coupling; tightening torque 0,7 - 1,5 Nm Contact Number of contacts arrangement (Contact arrangement acc. View on DIN EN 61076-2-106) mating side Gewicht (errechnet) / Calc WT : 0,027 kg Zul. Abw./Tolerances : Prüfmaß / Testdimension Teileindex / Partindexnumber: Edition 2000-05 values in brackets are according to DIN EN 61076-2-106 3) under operating conditions >108 Ohm A Do not connect or disconnect under load. Metal housing parts shall be securely incoporated to protected ground. Remark for gold plated contacts: In order to avoid brittle inter-metallic connections, gold plated terminals have to be tin-plated in the solder area. All technical data have been measured in a laboratory environment and can be different during pratical usage of the product. Any product information is for descriptive usage only and not legally binding; particulary the information does not constitute or provide any legal guaranties ("Beschaffenheitsgarantie" or " Haltbarkeitsgarantie"). 5 ISO 2768-c Bagatelle change: Gez. Maßstab / Scale : 2:1 E D C 202000083 Index Änderung/Description 01 30.11.2020 MCARL Datum/Date Name B A3 CUSTOMER DRAWING DIN / ISO 13715 30.11.2020 Drawn MCARLE Status Released Gepr. 10.02.2021 Checked MBERTSCH 2) 6 F 3) brass and / or zinc die cast, nickel plated or thermoplast thermoplastic silver or gold plated solder